HCIA-Transmission H31-311 Training Questions

H31-311 Huawei Certified ICT Associate-Transmission exam is qualified for HCIA-Transmission Certification. PassQuestion provides you with the best and latest HCIA-Transmission H31-311 Training Questions which can guarantee you 100% to pass HCIA-Transmission certification H31-311 exam. To choose PassQuestion you can feel at ease to prepare for your HCIA-Transmission H31-311 exam. 

HCIA-Transmission Certification Exam Summary - Huawei Certified ICT Associate-Transmission

HCIA-Transmission is intended for the development of professionals who possess basic knowledge and skills in transmission network technologies. . HCIA-Transmission certified engineers are able to perform basic configuration of transmission networks, equipment maintenance, and network management for telecom operators or enterprises.

The HCIA-Transmission exam covers Principles of Synchronous Digital Hierarchy (SDH), Wavelength-Division Multiplexing (WDM)Principles, and Optical Transmission Network (OTN) Principles，Multiplex Section Protection (MSP) and Subnetwork ConnectionProtection (SNCP), MSTP Hardware, and service configuration of MSTP equipment, U2000 Introduction and its basic operations.

Huawei H31-311 HCIA-Transmission Exam Outline

1. SDH Principles
1.1 SDH Overview
1.2 SDH Frame Structure and Multiplexing Procedure
1.3 Overheads and Pointers
1.4 Logical Functional Modules
1.5 Application of SDH Trail Layers and Overheads
2. MSTP System Overview
2.1 Introduction
2.2 Cabinets, Subracks, Chassis
2.3 Boards
2.4 Common NE types, Device Functions and Features
3. MSTP Protection Schemes
3.1 Device-Level Protection
3.2 Network-Level Protection
4. Ethernet Principles
4.1 Ethernet Classification
4.2 Ethernet Principles
4.3 Ethernet Port Technologies
4.4 VLAN Basics and Layer 2 Switching
4.5 EoS Concatenation and Encapsulation Technologies
5. Ethernet Service Introduction
5.1 Ethernet Services
5.2 Basic Parameters of Ethernet Services
6. U2000 System Overview
6.1 U2000 System
6.2 U2000 Commissioning and Maintenance Operations
7. WDM Principles
7.1 WDM Overview
7.2 Transmission Media
7.3 Key Technologies
7.4 Technical Specifications
8. OTN Principles
8.1 OTN Interface Structures and Multiplexing Mapping Principles
8.2 Frame Structures and Overheads
8.3 Trail Layers and Maintenance Signals
8.4 Common Alarms and Performance Events and OTN Overheads Application

View PassQuestion HCIA-Transmission H31-311 Training Questions Online

1.When a fiber cut test is performed on a normal MSP ring, which of the following alarms is reported? (Multiple Choice)
A. TU-AIS
B. R-LOS
C. APSJNDI
D. BD STATUS
Answer: BC

2.When a bridge uses the IVL learning mode, the entry in the MAC address table is created according to the source MAC address and source port of the data frame. This entry is valid for all VLANs.
A. TRUE
B. FALSE
Answer: B

3.Compared with a dense wavelength division multiplexing (DWDM) system, a coarse wavelength division multiplexing (CWDM) system provides a certain number of wavelengths and a transmission distance within ( ) km, which greatly reduces system cost and has strong flexibility.
A. 50
B. 100
C. 200
D. 20
Answer: B

4.The SNCP switching speed can be improved if you classify the SNCP services that have the same source, sink, or route into groups.
A. TRUE
B. FALSE
Answer: A

5.The standard Ethernet frame length should not be less than 64 bytes.
Which of the following factors cause this limitation? (Multiple Choice)
A. Minimum transmission distance
B. Maximum transmission distance
C. Working mechanism of conflict detection
D. MAC address
Answer: BC

6.The device IP addresses of the gateway NE and non-gateway NEs must be set in the same network segment.
A. TRUE
B. FALSE
Answer: B

7.Which of the following are the service board types of MSTP devices? (Multiple Choice)
A. Interface board
B. Service processing board
C. Service processing board with interfaces
D. Auxiliary board
Answer: ABC

8.When the LCAS function is used, which of the following overhead bytes are used to transmit control information? (Multiple Choice)
A. M1
B. H4
C. K2
D. K4
Answer: BD

9.Which of the following are the electrical-layer overheads of OTN? (Multiple Choice)
A. OPUk
B. ODUk
C. OCh
D. OTUk
Answer: ABD

10.The working mode of a port determines the flow control mode of the port. 
When the working mode is 100 Mbit/s full duplex, which of the following flow control modes can be used?
A. Auto-negotiation flow control mode
B. Non-auto-negotiation flow control mode
C. Both of the above
D. None of the above
Answer: B

VCP-NV 2020 2V0-41.19 Practice Test Questions

2V0-41.19 VMware Professional NSX-T Data Center 2.4 exam is a hot exam qualifying for VCP-NV 2020 Certification.PassQuestion provides you the gateway to success in actual VMware 2V0-41.19 exam. Our VCP-NV 2020 2V0-41.19 Practice Test Questions are enough to prepare you best for your coming 2V0-41.19 Certification Exam. PassQuestion guarantees that you will be easily able to succeed in your VMware 2V0-41.19 Exam.

2V0-41.19 Exam Overview - VMware Professional NSX-T Data Center 2.4

The Professional NSX-T Data Center 2.4 exam validates an individual can install, configure, setup, maintain, and perform basic troubleshooting of software-defined networks based on VMware’s NSX-T 2.4 Data Center.

The Professional NSX-T Data Center 2.4 exam (2V0-41.19) which leads to VMware Certified Professional-Network Virtualization 2020 certification is a 70-item exam, with a passing score of 300 using a scaled method. Candidates are given an appointment time of 105 minutes, which includes five-minute seating time and adequate time to complete the exam for non-native English speakers. Actual exam time is 100 minutes.

VMware NSX-T Data Center 2.4 2V0-41.19 Exam Sections

Section 1 – Architecture and Technologies
Section 2 – Products and Solutions
Section 3 – Planning and Designing
Section 4 – Installing, Configuring, and Setup
Section 5 – Performance-tuning, Optimization, and Upgrades
Section 6 – Troubleshooting and Repairing
Section 7 – Administrative and Operational Tasks

View Online 2V0-41.19 Free Questions From PassQuestion VCP-NV 2020 2V0-41.19 Practice Test Questions

1.Which two commands are used to query the arp-table of a logical switch? (Choose two.)
A. get logical-switch arp-table
B. get logical-switch arp-table
C. get logical-switch arp-table
D. get logical-switch arp-table
E. get logical-switch arp-table
Answer: AB

2.When a stateful service is enabled for the first time on a Tier-0 Gateway, what happens on the NSX Edge node?
A. SR and DR doesn't need to be connected to provide any stateful services.
B. SR is instantiated and automatically connected with DR.
C. SR and DR is instantiated but requires manual connection.
D. DR is instantiated and automatically connected with SR.
Answer: B

3.Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?

A. Reverse NAT
B. SNAT
C. 1:1 NAT
D. DNAT
Answer: D

4.A security administrator needs to configure a firewall rule based on the domain name of a specific application.
Which field in a distributed firewall rule does the administrator configure?
A. Policy
B. Profile
C. Service
D. Source
Answer: B

5.What are two supported VPN configuration types in a NSX-Y Data Center? (Choose two.)
A. OpenVPN
B. MPLS
C. L3VPN
D. L2VPN
E. SSLVPN+
Answer: CE

6.An NSX administrator is applying QoS to guarantee bandwidth for critical production workloads.
Which three actions must be taken? (Choose three.)
A. Edit the exported JSON file.
B. Export transport node NIOC profile.
C. Create a QoS segment profile.
D. Specify QoS parameters.
E. Change Segment QoS profile.
F. Upload the JSON file and apply configuration.
Answer: BCD